
Table of Contents
Most businesses pay for electrical work in two ways: planned maintenance booked in advance, and reactive repairs when something fails. Get the balance wrong and you end up paying call-out rates for faults a routine check would have caught, like a loose connection that has been tripping the same circuit for weeks.
This guide covers what planned and reactive maintenance each include, whether a maintenance contract is a legal requirement, what your budget should allow for, and how to compare quotes.
If you are comparing planned and reactive electrical maintenance, the useful question is not simply which costs less. It is what your premises need, what each quote includes and how much disruption a fault could cause.
Allow for routine visits and faults between them when you set the budget. Known repairs and larger replacements need their own allowance, so they do not use up the money set aside for scheduled checks and servicing.
There is no single sensible annual figure for every business. A small office, a busy shop and a workshop with production machinery have different installations, operating hours and consequences if power is lost. Start with a competent electrician’s assessment and a written scope, not a percentage copied from another business.
Planned maintenance
Work arranged in advance to help keep electrical systems safe and in suitable condition. Depending on the premises and agreed scope, it may include inspections, testing, servicing and work on developing defects. The schedule should reflect the equipment, how it is used, its surroundings, previous findings and manufacturer instructions.
Reactive maintenance
Starts with a problem: loss of power, a circuit that keeps tripping, damaged equipment or another fault that needs investigation. The first attendance may identify the problem and make the system safe. Completing the repair may need parts, further investigation or a return visit.
A useful plan tells you what will be checked, when access is needed, what records you will receive and how recommended repairs will be handled. Our electrical installation servicing page explains the support available, from visual inspections through to electrical testing.
Ask whether a call-out charge includes any diagnostic time and how additional labour and materials are charged. A planned service cannot prevent every fault. Equally, repeatedly paying to restore power without addressing the cause can leave you with the same disruption again. Our reactive electrical works service covers fault finding and repairs for commercial and domestic premises.
Planned and reactive maintenance compared
| Planned maintenance | Reactive maintenance | |
|---|---|---|
| Scope | Inspections, testing, servicing and work on developing defects, as agreed for your premises. | Investigating a problem such as loss of power, a circuit that keeps tripping or damaged equipment. |
| Charging | A fee for the visits, checks and reports listed in the quote. Ask whether faults found during a visit are repaired within the fee or quoted separately. | Ask whether a call-out charge includes diagnostic time, and how additional labour and materials are charged. |
| Response | Visits are arranged in advance around your business. | Starts when something goes wrong. The first attendance may identify the problem and make the system safe, but completing the repair may need parts, further investigation or a return visit. |
| Exclusions | Anything outside the agreed scope needs a separate quote or budget line, such as specialist machinery or replacing equipment. A planned service cannot prevent every fault. | A stated response time is not necessarily a promise that the repair will be completed within that time. Repeatedly restoring power without addressing the cause can leave you with the same disruption. |
In Great Britain, the Electricity at Work Regulations require electrical systems to be maintained, so far as reasonably practicable, to prevent danger. They do not prescribe a universal maintenance contract or a single inspection interval for all businesses.
HSE guidance on the regulations explains that inspection and, where necessary, testing form part of preventive maintenance. What is needed depends on the circumstances. Buying a contract is not, by itself, proof that every responsibility has been met.
An Electrical Installation Condition Report (EICR) assesses the condition of the fixed electrical installation. It is not a substitute for dealing with faults between inspections, and it does not automatically include repairs. See our commercial EICR guide for inspection scope and timing.
Ask the contractor to separate the following costs in the quote.
1. Understand the installation
If records are incomplete, allow for an initial review before agreeing to an ongoing package. Share previous reports, outstanding recommendations and recurring faults. Be clear what belongs to your business and what a landlord or another contractor manages.
2. Scheduled inspections and servicing
The quote should list the visits, checks and reports you are paying for. Go through fixed-installation inspection, portable equipment checks, emergency lighting, fire alarms and specialist machinery with the contractor. Which are included? Which need a separate quote, and which are outside their scope?
3. Known repairs
Keep existing defects separate from the price of maintaining an installation in good condition. Ask for the safety priority, recommended timing and cost of each repair. A serious safety concern must not be deferred to fit next year’s budget. Where equipment or a circuit may be unsafe, get competent advice promptly and follow the instructions given about keeping it out of use.
4. Unexpected faults
Look at previous call-outs and the condition of the installation when setting a contingency. Ask about attendance charges, hourly rates, minimum charges, parts and out-of-hours costs. If there is no useful history, agree a starting allowance with your contractor and review it as you learn more. Check whether a service agreement includes call-outs or only offers access at an extra charge. A stated response time is not necessarily a promise that the repair will be completed within that time.
5. Access, disruption and renewals
Where work needs the power to be off, agree which areas will be affected, who needs to be available and whether it can be done outside busy hours. Budget separately for replacing ageing equipment or altering the installation for new machinery; neither is a routine service visit.
Do not assume that the words “electrical maintenance” cover everything with a power supply. Different systems can need different expertise and schedules.
HSE’s machinery maintenance guidance highlights the importance of planning work and using competent people. Ask what is likely to need attention over the next few years, without treating an estimate as a guaranteed replacement date.
Imagine a shop where a circuit supplying essential equipment has tripped several times. A call-out may get the immediate problem investigated, but the business also has to consider interrupted trading, affected stock and staff time.
For that shop, arranging an investigation at a quieter time may make access easier. Repairs identified during the visit may then be scheduled before the next busy period. There is no guarantee of a saving or freedom from further faults. The owner still needs to weigh the proposed work against the disruption to trading.
When estimating disruption, avoid counting the same loss twice. Lost sales, lost profit and wages paid during a stoppage are not interchangeable figures. Keep the contractor’s costs separate from your own estimate of business impact.
Give each contractor the same information and ask these questions before comparing the totals:
A lower annual fee may cover a narrower service. A higher one is not automatically better value either. The aim is a clear, suitable scope and an understandable route for dealing with anything outside it.
Staff role: Staff can help by reporting visible damage, unusual smells or recurring trips promptly. They should not remove covers, attempt electrical repairs or repeatedly reset a protective device to keep equipment running. Arrange a competent investigation and follow your workplace safety procedures.
No. Scheduled visits cost money, and faults can still happen between them. Check what the fee covers and whether those checks and services suit your installation. Finding a problem before a busy trading period may make repairs easier to arrange, but that is not a guaranteed saving. Compare the proposed work and likely disruption rather than relying on a promise that a plan will pay for itself.
The maintenance approach must still keep the electrical system safe. A small premises may need a simpler plan than a large site, but waiting for visible failure is not a substitute for appropriate inspection and maintenance. Ask a competent electrician what is proportionate.
Not automatically. An EICR records findings from inspection and testing of the fixed installation. Repairs, routine servicing and future call-outs should be identified separately in the agreed scope.
Review it alongside your normal budgeting cycle and whenever significant changes occur, such as new equipment, longer operating hours, repeated faults or important inspection findings. Do not wait for the next annual review to deal with a safety concern.
Not necessarily. It may describe when the contractor will attend or begin responding. Diagnosis, parts and further access can affect completion. Ask the contractor to explain the commitment and any exclusions in writing.
Related reading
Calder Electrical has been providing electrical services to residential, commercial and industrial properties for over 40 years, and we are specialists in all aspects of electrical installations, maintenance and inspection and testing.
All our work is fully insured, and we work to the standards set by the NICEIC. Our team provides electrical maintenance, installation servicing and a call-out service for unplanned issues.
Discuss a maintenance plan
If you need a clearer maintenance budget, ask us to review your premises and agree a servicing scope. Bring recent reports, unresolved faults and details of equipment your business depends on, so the proposal can separate routine visits, repairs and future replacements.
Or would like us to provide a survey and quote then please contact us and we will be happy to help.
Call us on 0800 612 3001
